The kerfing has all been glued into place. There were little notches placed in the kerfing to allow space for the braces of the top
This photo is checking that the kerfing is completely flat and that there are no gaps between the top and the kerfing. Lightly clamp the top down and shine a very bright light from the side to see if there is any light that shines though into the body. The dry showed there was no obvious gap. I should be able to glue the top in place tomorrow morning.
\
The empty space left of the soundhole leaves room for the final brace.
The final brace for the top is clamped and glued with hide glue.
1 comment:
You Have Really Kept Your HourGlass Figure . . . nice work. ;)
Post a Comment